E4980AL Precision LCR Meter
Frequency: 20 Hz to 300 kHz/500 kHz/1 MHz, providing 4-bit resolution in any frequency range; basic accuracy: measurement at high and low impedance for excellent measurement repeatability and 0.05% Basic measurement accuracy; more features: 100 uV to 2 Vrms, 1 uA to 20 mA Variable test signal / DC offset 1.5/2 V / automatic level control / DC resistance / 201 point list scan / general PC connectivity ( LAN, USB and GPIB) / frequency upgradeable
N4000A SNS Series Noise Source
A 10 MHz to 18 GHz noise source rated at 6 dB ENR. The N4000A noise source is designed for accurate measurement of low noise figure devices, or devices where the gain is very sensitive to small changes in signal source impedance. The device accurately and reliably measures DUTs with noise figures up to 20 dB. A variety of connectors are available for the N4000A noise source. The standard configuration is APC 3.5 mm (male) connector
346A Noise Source
Frequency range: 10MHz to 18GHz; voltage standing wave ratio: < 1.3:1; connector: BNC (female) input bias / 3.5 mm (male); low SWR can reduce the uncertainty of noise figure measurement; specific frequency Individually calibrated ENR values; calibration procedures are provided on a floppy disk for easy loading into the NFA Series Noise Figure Analyzer
N8975A Noise Figure Analyzer
Frequency range from 10 MHz to 26.5 GHz in stand-alone solutions; APC 3.5 (meters) connector standard; Compatible with SNS series noise sources; Accurate description of amplifiers and frequency conversion equipment (including through dedicated Section 2 GPIB) Perform LO control)
N8975B Noise Figure Analyzer
The integrated solution offers a frequency range from 10 MHz to 26.5 GHz; multi-touch interface; including spectrum analyzer and IQ analyzer (base) mode; built-in standard options including P03, PFR, FSA, NFE and B25; (Female) input connector; compatible with SNS series noise sources: N4000A, N4001A, N4002A; NFA solution can be extended to 110 GHz using the specified downconverter; includes U7227C 100 MHz to 26.5 GHz external USB preamplifier
N8976B Noise Figure Analyzer
The integrated solution offers a frequency range from 10 MHz to 40 GHz; multi-touch interface; including spectrum analyzer and IQ analyzer (basic) mode; built-in standard options including P03, PFR, FSA, NFE and B25; 2.4 mm (male) input connector; compatible with SNS series noise sources: N4000A, N4001A, N4002A; NFA solution can be extended to 110 GHz using the specified downconverter; including U7227F 2 GHz to 50 GHz external USB preamplifier and 346CK40 1 kHz to 40 GHz noise source