N1076B Electrical Clock Recovery
Provides 125 MBd to 64 GBd data rate range (continuous) for electrical NRZ and PAM4 data signals; provides standard-compliant clock recovery ("ideal PLL") with adjustable peak and loop bandwidth (up to 20 MHz); Variable Equalizer (Option EVA) to lock down the degraded signal ("closed eye"); use jitter spectrum analysis (Option JSA) to deeply analyze the root cause of jitter. Consistent PLL Bandwidth and Peak Measurements Using the 86100DU-400 PLL Analysis Software
N1055A 35/50 GHz 2/4 Port TDR/TDT Remote Sampling Head for the 86100D DCA-X
Bandwidth option: 35 or 50 GHz (upgradeable); edge speed (10-90%, typical): 18 ps (35 GHz) or 7 ps (50 GHz); channel option: 2 or 4 channels per module (can Upgrade), with independent skew control, 86100D host with up to 16 channels; ultra-thin remote probe front end: 1.6m steady phase cable, 2.92mm (35GHz) or 1.85mm (50GHz) connector, integrated 67GHz diode limiting Provides ESD/EOS protection
86108B Precision Waveform Analyzer
Gain greater headroom with superior instrument performance: high bandwidth (50 GHz or 35 GHz) receiver, ultra low residual jitter (< 50 fs typical); adjustable clock recovery peak and loop bandwidth; flexible instrument configuration Reduce development time. The instrument is equipped with integrated clock recovery (50 Mb/s to 32 Gb/s data rate), integrated sensors, and phase matching cables
54754A Differential and Single-Ended TDR/TDT Module
Excellent test with noise characteristic rms: 0.25 mV (12.4 GHz bandwidth) or 0.5 mV (18 GHz bandwidth) and ±2 VDC maximum input signal; two built-in step generators can be configured for 1-port common mode, 2 Port common mode, 2-port differential TDR or TDT measurement for higher availability; easier timo test with built-in TDR/TDT calibration, user-selectable edge speed and S-parameters (requires host firmware A.06.01 or High version. S parameter requires option 202)
6383A/6383B Dimmable Attenuator
The 6383A/6383B dimmable attenuator provides continuous adjustable attenuation from 0dB to 80dB/0dB to 65dB over a wide wavelength range from 1200nm to 1650nm without power hopping and high attenuation accuracy and repeatability. The instrument has absolute attenuation mode and relative attenuation mode to meet a variety of customer testing needs
6337D Optical Power Meter
The 6337D optical power meter is a dual-channel high-sensitivity, high-precision, wide dynamic range optical power meter with a maximum test sensitivity of -90dBm, power accuracy better than ±2.5%, and ability to measure 800nm to 1700nm optical band, -90dBm Optical power in a wide dynamic range of ~+10 dBm. The product is equipped with two portable, pluggable, replaceable optical power meter modules, which have rich functions and expandability, and are easy to build a light wave test platform