FPS Signal and Spectrum Analyzer
Frequency range up to 4/7/13.6/30/40GHz; up to 160MHz signal analysis bandwidth; 0.4dB level measurement uncertainty (up to 7GHz); GSM/EDGE (including EDGE Evolution), WCDMA/HSPA+, LTE, WLAN, Vector signal analysis measurement application; phase noise is –110dBc (1 Hz) at 10kHz frequency offset; +15dBm third-order cut-off point (TOI); 1Hz bandwidth, 1GHz, display average noise level (DANL) is –155dBm
FSV Signal and Spectrum Analyzer
Frequency range up to 4/7/13.6/30/40 GHz; up to 160 MHz signal analysis bandwidth; universal measurement application covering phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics; support for LTE (including LTE Advanced ), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000/1xEV-DO, Bluetooth wireless measurement applications; in the case of harmonic mixers, frequencies up to 500 GHz
FSP Spectrum Analyzer
Frequency range 9 kHz to 3 GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz; resolution bandwidth from 1 Hz to 10 MHz; average noise level displayed - 155 dBm (1 Hz); phase noise - 113 dB (1 Hz), 10 kHz ; measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc.; measurement applications for cell standards and general purposes, eg phase noise, noise figure, etc.
FSQ Signal Analyzer
Frequency range from 20 Hz to 3.6/8/26.5/40 GHz; 28 MHz signal analysis bandwidth, optional 120 MHz; excellent RF characteristics: TOI typical. +25dBm/1dB compression point +13dBm / 84dBc ACLR/3GPP with noise correction Analyze signals in analog and digital basebands; numerous firmware applications extend signal analysis; 16 Msample I/Q memories, expandable to 705Msample
FSW Signal and Spectrum Analyzer
2 GHz internal analysis bandwidth up to 5 GHz when combined with the R&S®RTO2064 oscilloscope; 800 MHz real-time analysis bandwidth; SCPI recorder for simplified code generation; new flat Windows 10 design and multi-touch gesture support; FSW8: 2Hz to 8GHz; FSW13: 2Hz to 13.6GHz; FSW26: 2Hz to 26.5GHz; FSW43: 2Hz to 43.5GHz; FSW50: 2Hz to 50GHz; FSW67: 2Hz to 67GHz; FSW85: 2Hz to 85GHz
CMW100 Communications Manufacturing Test Set
The Communications Manufacturing Test Set is an innovative product for calibrating and validating mobile phones; it is suitable for fully automated robotic production lines: parallel testing on up to eight antennas; tightly coupled to test fixtures to reduce attenuation losses and related crosstalk; Reduce space requirements, floor space and energy consumption; fanless design for quiet operation; best reliability due to dust-proof housing