SMW200A Vector Signal Generator
Internal baseband up to 2 GHz I/Q modulation bandwidth for 4th and 5th generation standards (5G, LTE Advanced and IEEE 802.11ac/ad); frequency range from 100 kHz to 3 GHz, 6 GHz, 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz; optional additional RF path (100 kHz to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz); universal configuration: from single channel vector signal generator to multichannel MIMO receiver tester
ZNB Vector Network Analyzer
Frequency range from 9 kHz to 40 GHz; wide dynamic range up to 140 dB; two or four ports; four-port model with two separate generators; up to 48 ports with switch matrix
ZVL Vector Network Analyzer
The only instrument that combines the functions of a network analyzer, spectrum analyzer, and power meter; a bidirectional test set that displays all four S-parameters; ZVL3-75: 75 Ω vector for TV and cable TV measurements Network analyzer; time domain analysis; USB connector for NRP-Z power probe series to ensure accurate power measurement
ZND Vector Network Analyzer
Dual port network analyzer for unidirectional measurements from 100 kHz to 4.5 GHz; frequency range extends to 8.5 GHz; dynamic range up to 120 dB; power sweep range up to 48 dB; bandwidth from 1 Hz to 300 kHz; 100 traces and channels; compatible with all Rohde & Schwarz network analyzers
ZNC Vector Network Analyzer
Frequency range from 9 kHz to 3 GHz; dynamic range up to 130 dB; short scan time, only 11 ms for 401 scans; high temperature stability, typically 0.01 dB/°C; wide power Scan range from –50 dBm to +13 dBm (typical); IF bandwidth from 1 Hz to 300 kHz; low trace noise, 0.004 dB RMS at 10 kHz IF bandwidth
ZVT Vector Network Analyzer
The first true eight-port/six-port vector network analyzer has a frequency range from 300kHz to 8GHz/10MHz to 20GHz. The ZVT8 contains up to 4 internal generators and up to 16 receivers. The ZVT20 contains up to 3 internal generators and up to 12 receivers
